This is a replacement motor brush set used with the old style 36 volt G.E. motors. There are two brushes attached to one copper post. Set includes all four brushes with two attached to each post. The brushes measure 1-7/16" L x 5/8" W x 1/2" D.
Motor brushes are made from a much softer material than anything else inside the motor. Just from normal use they will wear over time and end up as powder accumulating inside the motor. Heavy loads or improper car use can also lead to melted brushes.
This brush set fits 'non-regen' GE 36-volt electric motors, common in the late 1980s through the 1990s. This motor brush set will fit the following golf carts during various years:
-36 Volt Electric DS Model Club Car Golf Carts made from 1980 to 1993. Factroy Part # 1011410
-36 Volt Electric Columbia Golf Carts made from 1986 to 1990. Factory Part # 83283-86
-36 Volt Electric Cushman Golf Carts. Factory Part # 886026
-36 Volt Electric E-Z-GO Golf Carts and Utility Vehicles. This includes the 3 & 4 wheel, 2 & 4 passenger Marathon Golf Carts, the BC Beverage Carts, the PC Personnel Carriers, the 300 and 500 Industrial and Turf Trucks, the 640 Parts Picker, and the 775, 835, 875, and 881 Industrial Carts. Factory Part # 16917-G1
-36 Volt Electric Taylor Dunn Golf Carts. Factory Part # 70-104-00
-36 Volt Electric Hyundai Golf Carts. Factory Part # GBI-801062
-36 Volt Electric Legend Golf Carts. Factory Part # 5561-2
-36 Volt Electric Nordskog Golf Carts. Factory Part # 20953
NOTE 1: To see an example of the motor style these brushes fit, please click on the picture. Note the configuration of the S1/A1 and S2/A2 motor terminals and the frame insulators under the terminals. Often these frame insulators should be replaced along with the brush set as they can burn, or may break during disassembly. If needed, please click the following link for the Old Style 36 Volt G.E. Motor Golf Cart Insulator Kit. This insulator set works with various styles brush & crossover configurations going back to GE motors from the 1970s.
NOTE 2: This motor brush set differs from other brush kits that are very similar. This copper stud has a rounded head with a square shand immediately under the head as opposed to the newer copper stud has a 6-sided hex head (just like a bolt). These later copper frame studs required a different set of insulators not compatable with the brushes offered here. To see the similar but later brush/crossover, please click New Style 36 & 48 Volt G.E. Motor Golf & Utility Cart Brush Set. To see the later insulators, please click the following link, New Style G.E. Motor Golf Cart Insulator Kit.
Please examine your brushes carefully in comparison with our picture and the dimensions provided. If you have any questions concerning the correct brushes for your motor, please contact our technical support team at 1-800-328-1953 and we'll be happy to assist you.