This is a golf cart tune up kit for all of you who still have the old style 175cc & 244cc E-Z-GO 2-cycle golf cart Fuji Heavy Industry gas engine made from 1974-79. This engine has an internal starter/generator. This kit consists of one set of points and a condenser.
NOTE 1: This golf cart point set & condenser will fit the 175cc engines after the engine serial number 2123, which occurred sometime in late 1973 or early 74. Carefully compare the point set you have with the one pictured, if they don't look the same then these will not work. Sorry, but we do not have the earlier 175cc point set or condenser.
NOTE 2: If you are installing a new golf cart point set use a feeler gauge to set the point gap to .017". The point gap will re-adjust itself down to .015" after a few hours of use. Leave it at .015". If you are installing a used set of points be sure the point faces are smooth (if not, file them smooth...pitted point faces are an indication that the condenser is failing) and set the gap to .015".
NOTE 3: While you are checking the point set be sure to take a close look at your golf carts starter/generator brushes too. There is a wear line on the side of each brush and if they are getting near that wear line, go ahead and replace them while you are in the blower housing. Also, if the short pigtail lead out of the side of the brush is getting near the bottom of its travel slot, it indicates the brush is almost worn out. DO NOT let these brushes get too short as it endangers the entire armature, and guess what...parts are no longer available.
Factory Part #'s : 13587-G1 & 13589-G1