This factory made 2" receiver is a heavy steel plate that mounts directly under the bagwell of E-Z-GO golf carts made from 1994 to present or under the rear bumper frame of E-Z-GO utility trucks made from 1996 to present. The receiver hitch bolts directly to the rear vehicle frame using existing holes...no drilling is required.
This receiver will fit Medalist and TXT model E-Z-GO golf carts, as well as the 800,1000, ST-350, ST-Sport, and ST-480 Workhorse utility vehicles, the 800 and 1000 Industrial carts, the 800 and 1200 MPTs, the 800 Hauler, the 280, 2100, 2200, and 4800 Cushman Commanders, and the 1000 and 1110 Jacobsen Haulers.
The receiver hitch also will bolt under the rear bumper of the earlier Marathon carts made prior to 1995, but you must drill holes in the steel bumper for this particular model.
The hitch points directly rearward from the vehicle and allows you to slide in a standard 2" trailer hitch (not included), or you may purchase the factory-made hitch from the drop down menu below.
If you intend to use your own slide-in trailer ball holder, you will probably have to drill a new hole 1-3/8" from the end. E-Z-GO's retainer pin holes are located in the slide-in hitch,which does not match most auto/truck style hitches (you may click on the picture for a comparison).
You may also click on the picture to see the hitch installed on an E-Z-GO WorkHorse utility vehicle.
Mounting hardware, the slide-in ball holder, and trailer ball are not included, but you may order these items by calling 1-800-328-1953. The slide-in hitch accepts a 1-7/8" Trailer Ball or a 2" Trailer Ball with a 3/4" shank, which are available online.
Important Note: None of these items are suitable for high speed trailering behind an auto or truck. E-Z-GO states the maximum tongue weight is 50 lbs., and maximum trailer weight with load included not to exceed 500 lbs.
E-Z-GO Factory Part #'s: 74348G01, 74260G01